Nap-Gard®

Fusion bonded epoxy powder coatings Asia Pacific

Nap-Gard® was developed to provide maximum corrosion protection of internal and external pipe for oil and gas pipelines as well as valve and girth weld coating protection. Axalta Nap-Gard® fusion bonded epoxy powder coatings are the innovator behind today’s pipe coating practices using epoxy coatings. Available in single, dual and multi-layer systems, Nap-Gard® is designed to provide maximum corrosion protection of internal and external pipe for oil and gas pipelines along with demanding wastewater and saltwater environments.

To the thermosetting powder coatings website South-East Asia

Markets

Nap-Gard®

Protective

Construction applications

External pipe coatings

Nap-Gard® 7-2500 series is a family of thermosetting epoxy powders, designed as a corrosion protectivecoating, for oil and gas pipelines in underground and subsea environments.

This family of products can be used as a single anti-corrosivelayer or as the primer in a dual layer or multilayer system.

Nap-Gard® powders are thermosetting, 100% solids, hazardous air pollutant (HAP) free, and are high building (8-30 mils) injust a single coat.

Construction applications

Internal pipe coatings

Nap-Gard® internal pipe coatings are thermosetting epoxy powders formulated to provide corrosion protection to drill pipe, production tubing and valves and fittings in the most extreme down hole environments.

For potable water: Nap-Gard® 7-2500 series

For a high-performance thermosetting epoxy powder coating that can meet the demanding requirements of both offshore and onshore applications, as well as the strict regulations for potable water applications, look no further than the Nap-Gard® 7-2500 series.

Nap-gard FBE Rebar

FBE rebar

Nap-Gard® functional coatings are a leading choice for rebar application for concrete structures and bridges. These systems meet or exceed the performance standards set by ASTM and AASHTO. They are designed to resist cobwebbing and shatter cracking when rebar is formed. These FBE rebar systems are 100% solids, HAPs free, and are high building in just a single coat.

Nap-gard FBE Rebar

FBE valve

Nap-Gard® 7-4500 coatings are designed for use as a valve coating. In testing, it meets the requirements of UL 262 gate valve specification and FM 1120/1130, 1510 and 1511 specifications. It has been certified to NSF-61, drinkingwater system components (AWWA C213).

Nap-gard FBE Rebar

Girth weld coating & FBE repairs materials

Nap-Gard® functional coatings are a leading choice for rebar application for concrete structures and bridges. These systems meet or exceed the performance standards set by ASTM and AASHTO. They are designed to resist cobwebbing and shatter cracking when rebar is formed. These FBE rebar systems are 100% solids, HAPs free, and are high building in just a single coat.

Product range

Nap-Gard®

External pipe coatings
Single layer systems

Nap-Gard® 7-2500 series

In buried service, the coating is designed to be capable of withstanding continuous operating temperatures of 107°C (225°F). May also be used on the inside of steel pipe and fittings, and is NSF-61 approved for potable water services.

Nap-Gard® 7-2514 EN series

Designed to be capable of withstanding continuous operating temperatures of 103°C (217°F). Formulated to offer improved resistance to cathodic disbondment and excellent corrosion resistance high tg.

Nap-Gard® 7-2555

Used in submerged or wet conditions where high in-service temperatures exist, up to 155°C (311°F).

External pipe coatings
Double layer systems

Nap-Gard® 7-2610

Abrasion resistant overcoat (ARO) provided abrasion an impact resitance, aids in protecting the the corrosion coating from damage during the installation or directional drilling process.

Nap-Gard® 7-2504

Provides water and impact resistance at high temperatures, capable of withstanding continuous operating temperatures of 130°C (265°F).

Nap-Gard® 7-2502NS

Provides a bonded, non-slip surface over standard FBE. This coating provides additional shear slip resistance to concrete coated pipe, used for negative buoyancy in offshore installations. (NS is a sacrificial coating and can be applied over any of our systems.

Nap-Gard® 7-2675

When used with 7-2555, the operating systems increases to 180°C (356°F). The second layer provides reduced water permeability and improved chemical resistance.

Internal pipe coatings

These coatings are used for a variety of internal corrosion protection from drinking water pipes to pipes/tubing in the most stringent down hole environments:

7-0008 - Capable of withstanding continuous operating temperatures of 93°C (200°F).

7-0017 - Capable of withstanding continuous operating temperatures of 140°C (285°F). Provides corrosion protection in high temperature and high pressure sweet and sour gas environments.

7-0014 - Designed for both external and internal pipe coating for buried pipeline service.  In particular, it is recommended for use on the inside of steel pipe. Meets the requirements of AWWA standards C116, C213, C550 and CSA standard Z245.20-10. Certified to NSF-61, drinking water system components.

Nap-gard FBE Rebar

FBE rebar

Nap-Gard® functional coatings are a leading choice for rebar application for concrete structures and bridges. These systems meet or exceed the performance standards set by ASTM and AASHTO. They are designed to resist cobwebbing and shatter cracking when rebar is formed. These FBE rebar systems are 100% solids, HAPs free, and are high building in just a single coat.

Nap-gard FBE Rebar

Girth weld coating & FBE repairs materials

Nap-Gard® functional coatings are a leading choice for rebar application for concrete structures and bridges. These systems meet or exceed the performance standards set by ASTM and AASHTO. They are designed to resist cobwebbing and shatter cracking when rebar is formed. These FBE rebar systems are 100% solids, HAPs free, and are high building in just a single coat.

Nap-gard FBE Rebar

FBE valve

7-4500 coatings are designed for use as a valve coating. In testing, it meets the requirements of UL 262 gate valve specification and FM 1120/1130, 1510 and 1511 specifications. It has been certified to NSF-61, drinkingwater system components (AWWA C213).