Voltatex 8816 ECO
Voltatex® 8816 ECO represents a class thermoplastic bonding wire enamel. Voltatex 8816 ECO bonding wire enamel can be applied to polyurethane, polyesterimide and polyesterimide/polyamideimide base coats. Magnet wires coated with Voltatex 8816 ECO as bond coat may be bonded by resistance heating, solvents or hot air. The minimum bonding temperature is 160 °C, but optimum bond strength requires a temperature of 180 °C. Combined with other Voltatex wire enamel products Voltatex 8816 ECO as bond coat exceeds the requirements and technical conditions of IEC 60317-35/36 and 37 and acc. ANSI/NEMA MW 131-C, MW 135-C and MW 136-C. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.
All Voltatex ECO Line Products
Product Criteria
Market
- Motors / Generators
- Automotive
Application
- Bondcoat
Additional features
- Cresol-free
| Product Features | |
| Chemical base | EPOXY |
| Thermal class | 180 °C |
| For diameter range |
0.30 – 3.00 mm |
| Solid content (1g, 1h, 180 °C) |
15.0 − 17.0 % |
| Viscosity DIN 53015 |
300 − 600 mPas (23 °C / 73.4 °F) |
| Special characteristics |
Based on an epoxy resin free from cresol and phenol. |